Petzl Volt Fall Arrest and Work Positioning Full Body Harness
The VOLT fall-arrest and work positioning harness is very quick to put on, thanks to the FAST LT PLUS buckles that allow it to be donned with both feet on the ground. The wide, semi-rigid waistbelt and leg loops provide excellent support. Its lightweight, breathable construction maximizes air flow. It features a textile dorsal attachment point designed for connecting a self-retracting fall-arrest system. It is certified to U.S. and European standards.
Features
Quick and easy donning:
- Waistbelt and leg loops equipped with FAST LT PLUS buckles for quick and easy fastening and unfastening without loss of adjustment, even while wearing gloves; these buckles allow the harness to be donned very easily, with both feet on the ground
- DOUBLEBACK self-locking buckles on waistbelt and shoulder straps for precise adjustment
- Leg loop foam position can be adjusted for ideal positioningComfortable throughout the workday:
- Wide, semi-rigid waistbelt and leg loops for excellent support and lightweight, breathable construction to maximize air flow
- Padded shoulder straps are widely spaced to reduce neck chafing and help distribute the load over the shoulders when the waistbelt is loaded
- Textile dorsal attachment point for connecting a self-retracting fall-arrest system
- Side slots allow a seat to be installed for greater comfort during prolonged suspensionEasy to use:
- Side attachment points can be folded down to prevent accidental snagging when not in use
- Stowing system for the MGO connectors on fall-arrest lanyards are located on each shoulder strap; in the event of a fall, the system releases the MGO connectors and allows the absorber to be deployed
- Equipment loops, as well as slots for CARITOOL tool holder and TOOLBAG tool pouch make it easy to organize work tools
Conformance
Certification(s): ANSI Z359.11, CSA Z259.10, CE EN 361, CE EN 358, UKCA
Specifications
Side attachment points: For attaching a positioning lanyard for use in double mode
Sternal attachment point: For attaching a fall-arrest system
Metal dorsal attachment point: For attaching a fall-arrest system
Textile dorsal attachment point: For attaching a self-retracting fall-arrest system
Rear waistbelt attachment point: For attaching a restraint lanyard
Material(s): Nylon, polyester, aluminum, steel
Size Reference
Size 0
Waist belt: 65-80cm
Leg loops: 44-59cm
Stature: 160-180cm
Weight: 1655g
Size 1
Waist belt: 65-80cm
Leg loops: 44-59cm
Stature: 165-185cm
Weight: 1715g
Size 2
Waist belt: 83-120cm
Leg loops: 50-65cm
Stature: 175-200cm
Weight: 1765g
The VOLT fall-arrest and work positioning harness is very quick to put on, thanks to the FAST LT PLUS buckles that allow it to be donned with both feet on the ground. The wide, semi-rigid waistbelt and leg loops provide excellent support. Its lightweight, breathable construction maximizes air flow. It features a textile dorsal attachment point designed for connecting a self-retracting fall-arrest system. It is certified to U.S. and European standards.
Features
Quick and easy donning:
- Waistbelt and leg loops equipped with FAST LT PLUS buckles for quick and easy fastening and unfastening without loss of adjustment, even while wearing gloves; these buckles allow the harness to be donned very easily, with both feet on the ground
- DOUBLEBACK self-locking buckles on waistbelt and shoulder straps for precise adjustment
- Leg loop foam position can be adjusted for ideal positioningComfortable throughout the workday:
- Wide, semi-rigid waistbelt and leg loops for excellent support and lightweight, breathable construction to maximize air flow
- Padded shoulder straps are widely spaced to reduce neck chafing and help distribute the load over the shoulders when the waistbelt is loaded
- Textile dorsal attachment point for connecting a self-retracting fall-arrest system
- Side slots allow a seat to be installed for greater comfort during prolonged suspensionEasy to use:
- Side attachment points can be folded down to prevent accidental snagging when not in use
- Stowing system for the MGO connectors on fall-arrest lanyards are located on each shoulder strap; in the event of a fall, the system releases the MGO connectors and allows the absorber to be deployed
- Equipment loops, as well as slots for CARITOOL tool holder and TOOLBAG tool pouch make it easy to organize work tools
Conformance
Certification(s): ANSI Z359.11, CSA Z259.10, CE EN 361, CE EN 358, UKCA
Specifications
Side attachment points: For attaching a positioning lanyard for use in double mode
Sternal attachment point: For attaching a fall-arrest system
Metal dorsal attachment point: For attaching a fall-arrest system
Textile dorsal attachment point: For attaching a self-retracting fall-arrest system
Rear waistbelt attachment point: For attaching a restraint lanyard
Material(s): Nylon, polyester, aluminum, steel
Size Reference
Size 0
Waist belt: 65-80cm
Leg loops: 44-59cm
Stature: 160-180cm
Weight: 1655g
Size 1
Waist belt: 65-80cm
Leg loops: 44-59cm
Stature: 165-185cm
Weight: 1715g
Size 2
Waist belt: 83-120cm
Leg loops: 50-65cm
Stature: 175-200cm
Weight: 1765g
The VOLT fall-arrest and work positioning harness is very quick to put on, thanks to the FAST LT PLUS buckles that allow it to be donned with both feet on the ground. The wide, semi-rigid waistbelt and leg loops provide excellent support. Its lightweight, breathable construction maximizes air flow. It features a textile dorsal attachment point designed for connecting a self-retracting fall-arrest system. It is certified to U.S. and European standards.
Features
Quick and easy donning:
- Waistbelt and leg loops equipped with FAST LT PLUS buckles for quick and easy fastening and unfastening without loss of adjustment, even while wearing gloves; these buckles allow the harness to be donned very easily, with both feet on the ground
- DOUBLEBACK self-locking buckles on waistbelt and shoulder straps for precise adjustment
- Leg loop foam position can be adjusted for ideal positioningComfortable throughout the workday:
- Wide, semi-rigid waistbelt and leg loops for excellent support and lightweight, breathable construction to maximize air flow
- Padded shoulder straps are widely spaced to reduce neck chafing and help distribute the load over the shoulders when the waistbelt is loaded
- Textile dorsal attachment point for connecting a self-retracting fall-arrest system
- Side slots allow a seat to be installed for greater comfort during prolonged suspensionEasy to use:
- Side attachment points can be folded down to prevent accidental snagging when not in use
- Stowing system for the MGO connectors on fall-arrest lanyards are located on each shoulder strap; in the event of a fall, the system releases the MGO connectors and allows the absorber to be deployed
- Equipment loops, as well as slots for CARITOOL tool holder and TOOLBAG tool pouch make it easy to organize work tools
Conformance
Certification(s): ANSI Z359.11, CSA Z259.10, CE EN 361, CE EN 358, UKCA
Specifications
Side attachment points: For attaching a positioning lanyard for use in double mode
Sternal attachment point: For attaching a fall-arrest system
Metal dorsal attachment point: For attaching a fall-arrest system
Textile dorsal attachment point: For attaching a self-retracting fall-arrest system
Rear waistbelt attachment point: For attaching a restraint lanyard
Material(s): Nylon, polyester, aluminum, steel
Size Reference
Size 0
Waist belt: 65-80cm
Leg loops: 44-59cm
Stature: 160-180cm
Weight: 1655g
Size 1
Waist belt: 65-80cm
Leg loops: 44-59cm
Stature: 165-185cm
Weight: 1715g
Size 2
Waist belt: 83-120cm
Leg loops: 50-65cm
Stature: 175-200cm
Weight: 1765g